PHILIPS LIGHTING CONTROL

OccuSwitch is a stand-alone movement detector that switches lights off when an area is vacated. A simple,yet effective way to reduce energy consumption by up to one third. OccuSwitch also has a fast payback time, a low total cost of ownership and helps you to comply with the latest EU building directives.

It’s a versatile solution that helps you to maximize energy savings wherever it’s installed. Compatible with any type of luminaire or lamp, the highly sensitive movement detector is not only perfect for offices, but also for storage rooms, toilets, corridors and lobbies, as well as spaces that are only occassionaly occupied during the day.

OccuSwitch features daylight override as standard, which prevents the lights from being switched on when there is sufficient daylight. But with the option to include daylight switching you can improve its energy-saving potential even further. The advanced version can be used in parallel occupancy mode (up to 10 units).

The Occuswitch is a movement detector with a build-in switch. It will switch off the lights in a room or area when it is vacated and thus save up to 30% of electrical energy. The Occuswitch can switch any load up to 6 A and control an office area of around 20m2.

A detachable mains connector enables easy installation and mounting of the Occuswitch in the ceiling.

A separate Wieland cable is available for easy, fast and trouble-free installation.

The Occuswitch family exists of:

LRM1070 Basic Occuswitch

LRM1080 Advanced Occuswitch

LCC1070 Wieland cable

LRH1070 Ceiling mounting box

Movement detector with a built-in switch. Occuswitch can switch any load up to 6A and control an office area of around 20 m². A detachable mains connector enables easy installation and mounting

of Occuswitch in the ceiling. A separate Wieland cable is available for easy, fast and trouble free installation. LRM1080 is the same but with parallel operation (up to 10 OccuSwitch units), local override and absence mode.

Applications

The Occuswitch is designed for use in offices and similar applications, including toilets, storage rooms, etc. It is optimized for recessed ceiling mounting and for mounting heights between 2.5 and 3.5 meter.

The surface box allows surface-mounting as well, with either recessed wiring or surface-mounted ducts.

The advanced Occuswitch can be connected in parallel (max 10)

to cover larger area’s like open plan offices. The use of different mains groups or even phases is no problem.

Applications (continued)

The Occuswitch’s detection pattern (see drawing) is 4 by 5 meters for small movements (desk work) and 6 by 8 meters for larger movements like walking.